KTS Titanium
KTS Titanium
KTS Titanium Truss Rods
We produce several size of titanium truss rods by request. By changing material to titanium the results are a lighter neck, which in turn results in better tone and playability. Titanium provides the ultimate flexibility for truss rods. Truss Rod...
$75.00
KTS Titanium Neck Reinforcement Bar
After repeating the cold rolling process several times, these titanium rods become the perfect hardness for guitar reinforcements. By placing two of these on both sides of the truss rod, they will greatly reinforce the neck strength as well as...
$29.00
KTS Titanium PR-Mu
There are no height screws in the saddles and each saddle is a different diameter so that they sit at different heights to compensate for the fingerboard radius. The Fender original Mustang saddles are assembled into the bridge loosely. Our...
$190.00
KTS Titanium PR-18
Introducing our new block style saddles PR-18 which have 10.8mm pitch to fit Gotoh 510, GE1088,1089 etc. The new PR-18 can be installed perfectly on 10.8mm pitch (2.125" E to E spacing) bridge without any gap between the saddles. SPECIFICATIONS:...
$201.00
KTS Titanium PR-17
This block type titanium saddle can be used on most Strat type guitar bridges including the current American Standard, PRS, Gotoh GTC101, and many others. SPECIFICATIONS: 6 pcs . M3 thread Width=10.5m/m( .413in) . Length=19.0m/m( .748in) . Height=4.5m/m( .177in) ....
$201.00
KTS Titanium PR-15
This offset type saddle can be used for US made Standard Stratocasters® and Strat® Plus.
SPECIFICATIONS:
6 pieces, 4/40thread, Width=10.5m/m( .413in), Length=21.0m/m( .827in), Height=5.5m/m( .217in), E to E Spacing=52.5m/m(2.065in)
PR-15 Specs
$103.00
KTS Titanium PR-14
This narrower pitch (.413in) saddle is compatible with PRS and most of guitars made in Asia.
SPECIFICATIONS:
6 pieces, 4/40thread, Width=10.5m/m( .413in), Length=21.0m/m( .827in), Height=5.5m/m( .217in), E to E Spacing=52.5m/m(2.065in)
PR-14 Specs
$103.00
KTS Titanium PR-11
Designed to match Stratocasters® made in USA and Mexico. The screw pitch follows "Inch" standard.
SPECIFICATIONS:
6 pieces, 4/40 thread, Width=11.3m/m( .445in), Length=21.0m/m( .827in), Height=5.5m/m( .217in) , E to E Spacing=56.5m/m(2.225in)
PR-11 Specs
$103.00
KTS Titanium PR-08WD
Facing in the string direction, the saddle adjusts obliquely to improve the octave tuning function which has previously been the drawback with the standard two-strings-per saddle model saddles. Stability improves for high position chords as well. It can be attached...
$119.00
KTS Titanium PR-08Quattro
Saddles from late 1954 were the plain steel barrel type with no grooves. They were .250” in diameter. After mid 1958 the plain steel saddles were replaced by the .250” diameter threaded saddles that remained a standard part until sometime...
$93.00
KTS Titanium PR-08 Saddles
Two-string per saddle model for the Telecaster® manufactured by Fender Japan. String pitch is 10.8 mm. It can be attached to the USA manufactured Telecaster® as well. A slight string groove has been manufactured directly on the saddle.
PR-08 Specs
$93.00
KTS Titanium PR-06set
PR-06 titanium saddles are pre-assembled with zinc die cast base. This bridge base is not Gibson's® original parts. But it can be used as a replacement for the original Nashville Tune-O-Matic Bridge. Also you can use this bridge on some...
$114.00
KTS Titanium PR-06
Designed to match Gibson's ® original bridge BR-030. As with the original parts, it has not been manufactured with a string groove. After applying saddle to bridge base, trim it to match strings pitch. You can use regular file for trimming...
$67.00
KTS Titanium PR-05 Saddles
Designed to match GE-103B, GE-103BT which is made by GOTOH®. Gotoh® bridges are often used as replacement parts for relatively expensive models made by guitar manufacturers. String groove is pre-filed on center of the saddle.
PR-05 Specs
$67.00
KTS Titanium PR-04 Synchronized Tremolo Bridge Saddles - 2 1/8" Spacing
This press-saddle is designed to match the Japanese synchronized tremolo bridges made by Gotoh® and others. The string pitch is 10.8m/m.
PR-04 Specs
$103.00
KTS Titanium PR-03WB1 Bass Bridge
"PR-03" titanium bass saddles are pre-assembled with titanium mounting plate. Designed to replace standard J-Bass bridges. Also adaptable for "Fender® Vintage Style" and Precision Bass bridges.
$149.00
KTS Titanium PR-03SPWB1 Bass Bridge
"PR-03SP" titanium bass saddles are pre-assembled with titanium mounting plate. Designed to replace standard J-Bass?« bridges. Also adaptable for "Fender® Vintage Style" and Precision Bass bridges.
$149.00
KTS Titanium PR-03SP Bass Bridge Saddles
Based on the design of the FENDER® JAZZ BASS style saddles and thread type. Height adjustment screws and octave adjustment screws are stainless steel.
PR-03SP Specs
$119.00
KTS Titanium PR-03 Bass Bridge Saddles
It is applicable so-called Fender?« Vintage Style Bass Bridge. The specification is followed to the original parts for Fender Japan?«.
PR-03 Specs
$119.00
KTS Titanium PR-02 Saddles
Designed to match Gibson's® original bridge, BR-010. As with the original parts, the string groove is not filed. After applying saddle to bridge base, trim it to match strings pitch. You can use regular file for trimming but we recommend...
$67.00
KTS Titanium PR-01set
PR-01 titanium saddles are pre- assembled with zinc die cast base. This bridge base is not Gibson's® original parts. But it can be used as a replacement for the original Vintage ABR-1 Bridge. Also you can use this bridge on...
$95.00
KTS Titanium PR-01EPset - PR-01 Epiphone® T-O-M Bridge Set
PR-01 EP titanium saddles are pre-assembled on a zinc die cast base. Epiphone® bridges are manufactured by several different factories in several Asian countries, so there are some spec variations for many models. Therefore we decided to prepare the bridge...
$95.00
