Description
xSolderX brand pre-wired control plate / harness for Telecaster® style guitars, designed to give the user great giggity tone. SolderX is a new company powered by 30 years of guitar industry knowledge.
Once your pickups are connected, the 3-way switch functions as a standard Tele® with a master volume pot first and the master tone pot toward the rear.
Connection is easy. All you need is a screwdriver and a soldering iron. Directions are included in the package and are easy to follow.
This control plate should be grounded to your guitar by utilizing the bridge ground and body ground wires that should be on your guitar from the factory. If you're building a new guitar from scratch then you will have to source some 22 gauge ground wire.
- AxLabs 250K pots
- AxLabs 3-way Switch
- Nickel Finished Flat Top Knobs
- Nickel Finished Control Plate
- PureTone Output Jack with Gavitt Wire
- Orange Drop Capacitor
Once your pickups are connected, the 3-way switch functions as a standard Tele® with a master volume pot first and the master tone pot toward the rear.
Connection is easy. All you need is a screwdriver and a soldering iron. Directions are included in the package and are easy to follow.
This control plate should be grounded to your guitar by utilizing the bridge ground and body ground wires that should be on your guitar from the factory. If you're building a new guitar from scratch then you will have to source some 22 gauge ground wire.
Compare color
- Choosing a selection results in a full page refresh.